How to Apply FEDUS Laptop Screen Guard
A simple step-by-step guide to install your screen guard safely and correctly.
Takes less than 2 minutes to understand.
Installation Video
Watch this short video before applying the screen guard.
Video Player
45-60 seconds
Recommended: Watch the full video once before starting.
Before You Start
Proper preparation prevents bubbles and ensures a clean application.
- Clean your hands thoroughly
- Choose a dust-free room or area
- Turn off your laptop completely
- Wipe the screen clean using the provided microfiber cloth
Step-by-Step Installation
1
Place your laptop on a flat, stable surface.
2
Remove all dust from the screen using the provided cloth. Check carefully for any particles.
3
Peel off Tab 1 from the screen guard to expose the adhesive side.
4
Align the screen guard with the top edge of your laptop screen. Do not press yet.
5
Once aligned correctly, gently press the center of the screen guard.
6
Slowly peel off Tab 2 while smoothing the guard down from center to edges.
7
Use the smoothing card (if provided) or a soft cloth to push out any remaining air bubbles toward the edges.
Common Mistakes to Avoid
These simple mistakes cause most installation problems.
Applying the guard in a dusty or windy environment
Pressing down before checking proper alignment
Peeling and reapplying multiple times
Rushing through the cleaning step
Using excessive force while smoothing
Bubbles & Dust — Quick Fixes
Small Air Bubbles
Tiny bubbles trapped under the screen guard
These usually disappear within 24-48 hours. If they persist, gently lift the nearest edge and reapply while pushing the bubble out.
Dust Particle Visible
You can see a dust speck under the guard
Carefully lift the screen guard from the nearest corner. Use the adhesive side of tape to remove the dust particle, then reapply.
Edge Not Sticking Properly
Corner or edge keeps lifting up
Clean the edge area again and press firmly for 10-15 seconds. Ensure no oil or moisture is present.
Usage & Care Tips
- Clean the screen guard with a soft, dry microfiber cloth
- For stubborn marks, use a slightly damp cloth (water only)
- Do not use alcohol, acetone, or harsh chemical cleaners
- Avoid pressing sharp objects against the screen
- Remove the guard slowly if replacement is needed
- Replace every 12-18 months for best clarity
Need Help?
If you're unsure or need help, our support team is here.
📞 Phone: 8929133313
📧 Email: INFO@CHEEKUTECH.COM
We typically respond within 24 hours on working days.
- Choosing a selection results in a full page refresh.
